MINOLTA-QMS PagePro 4100W, Руководство пользователя

Страница: 131 / 163

6 Troubleshooting
6-10 PagePro 4100W
Toner smudges
l
The toner may be unevenly
distributed inside the imaging
cartridge.
Remove the imaging cartridge and
rock it left and right a few times to
distribute remaining toner.
l
The imaging cartridge may be
defective.
Remove the cartridge and check it
for damage. Replace the cartridge if
necessary (see page 5-2).
l
Smudges on the back of the paper
indicate a dirty transport roller.
Contact your dealer.
6.4 No output
Failure to produce output may indicate a communications problem
between the printer and your computer. Check the following points to see
if you can correct the problem. If problems persist, contact your dealer.
Are you using the correct type of printer cable?
Save the data you are trying to print and close all the applications currently
open on your computer. Next, reset your computer to send a break signal
to the printer. Now check your printer cable against the specifications in
Chapter “Specifications” of this User’s Manual.
NOTE
Í When connecting your computer to the parallel connector on the
printer, we recommend using an IEEE1284/ ECP/ EPP/ compatible
parallel interface cable (1.5 m long).
Are your computer’s communications port settings correct?
Refer to the documentation that comes with your computer and check if
its current communications port settings are correct.