MINOLTA-QMS magicolor 2350, Руководство пользователя

Страница: 43 / 208

Output Tray
41
En
g
lis
h
2
Set the driver for the duplex layout you prefer.
Long Edge creates a document that flips horizontally as in a loose-leaf
notebook; Short Edge creates a document that flips vertically, as on a
clipboard. Simplex prints only on the front face of the page.
3
Click
OK
.
Output Tray
All media is output face-down to the output tray on top of the printer. The
output tray has a capacity of 200 sheets of 22 lb (80 g/m
2
) bond paper.
If the media is stacked too high, your printer may experience media
jams, excessive media curl, or static buildup.
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
Media Storage
How do I store media?
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored unwrapped may become too dry or absorb
too much moisture and cause jamming.
If media has been removed from its wrapper, place it in its original
packaging and store in a cool, dark place on a level surface.
Avoid moisture, excess humidity, direct sunlight, excess heat (above
95
° F/35 ° C), and dust.
Avoid leaning media against other objects or storing in an upright position.
Before using stored media, do a trial printing and check print quality.