MINOLTA-QMS ENord magicolor 3100, Руководство по установке, Страница: 12 / 56

Setting up Your Printer 8
English
Installing the Imaging Unit
Attention
The OPCs are extremely sensitive to bright light, direct sunlight, and
touch. Always leave the imaging unit in its protective bag until you’re
ready to install it. Any exposure to light should be limited to less than
two minutes, or permanent damage could result.
1
Open the front cover (button A), and remove any tape.
2
Open the imaging unit cover.
3
Remove the imaging unit from its
protective bag.
4
Holding the imaging unit horizontally,
carefully pull the tabs straight out and
completely away from the unit.
Attention
Do not twist the tab as you are
pulling it. If any tab doesn’t pull
completely out (you must be able to
see the circle imprinted on the end),
the imaging unit must be replaced.
The imaging unit contains 4 OPCs (Optical Photo
Conductors) and developers, and an imaging unit
transfer roller that form the image that is developed
and transferred to the media.
A
2
1
26"
/660 mm