Minnich A-1-36, Руководство оператора и сервисное руководство

Страница: 16 / 31

Dowel Drill Manual
16
SET-UP OPERATION
Supplier Below 4°C
(SAE 10W)
4°C-36°C
(SAE 202, 30)
Above 36°C
(SAE 40)
AGIP Rock Drill RD100
Caltex RPM Vistac Oil 32X or
Rock Drill Lube 46
RPM Vistac Oil
100X
RPM Vistac Oil
230X
Texaco Rock Drill Lube 46 Rock Drill Lube 100 Rock Drill Lube 320
Chevron Vistac Oil 32X Vistac Oil 100X Vistac Oil 320X
Mobil Almo Oil No. 1 Almo Oil No. 2 Almo No. 5
Shell Shell Tona Oil R100 Shell Tona Oil R320 (140)
Ambient Temperature (Equivalent SAE)
***DO NOT USE ENGINE OIL, DIESEL OR HYDRAULIC FLUID***
Be sure lubricator is full. See recommended oils below.
Make sure slab wheels are square against face of slab.
Using feed control valve, feed bit against slab.
Using drill control valve, turn drill on and drill until the
drill slider is against the stop clamp, which should be
set for the required depth of hole.
Once drill slider is against the stop clamp, leave the
drill on and use the feed control valve to retract the
drill from the hole. Note: If bit will not retract from hole,
feed drill back into hole and retract drill again.
Step 1
Step 2
Step 3
Step 4
Step 5
DO NOT hit drill slider to retract the bit from
the hole. This will damage the drill slider.