22 |
©2016 Johnson Outdoors Marine Electronics, Inc.
BATTERY METER
TEST WITH MOTOR OFF
POWER AUTOPILOT
TEST
USING & ADJUSTING THE MOTOR
MOUNT FEATURES
Depth Collar & Depth Collar Knob
The Depth Collar is located on the Shaft above the Lift Assist Housing. It functions to hold the motor at the proper depth while
deployed. It also functions to hold the Lower Unit in place when stowed while not in use and during transport. The Depth Collar
Knob is used to loosen and tighten the Depth Collar so that it can be used to slide up and down the motor shaft.
Fall Away Ramps
The Fall Away Ramps hold the Lower Unit when the Motor is
stowed and rotate to release the Lower Unit as the unit is
being deployed. When the Stow Deploy Lever is pressed it
unlocks the position of the Fall Away Ramps and the Ramps
rotate to guide the Lower Unit back onto the mount when the
motor is stowed.
Power Button
The Power button
is located on the Indicator Panel on the Mount. The Terrova must be manually powered "on" and "off".
When the Motor is powered "on", the Power Indicator will be illuminated green when the Motor is powered "off", the Power
Indicator will not be illuminated .
Stow Deploy Lever
Depth Collar
Depth Collar Knob
Shaft
Lift Assist Collar
Lower Unit
Steering Housing
Lift Assist Housing
Fall Away Ramp
Indicator Panel
Push-to-Test
Battery Meter
AutoPilot
Power
Power
Button
WARNING
When the motor is being transported, it is important to place the Depth Collar snug against the Lift Assist Housing and tighten.
This provides a secure stow and holds the motor in place during transportation when it is subject to high levels of shock and
vibration. Failure to secure the motor may result in injury or damage to the unit.
WARNING
When stowing or deploying the motor, keep fingers clear of
all hinge and pivot points and all moving parts.
Become familiar with the features of the motor to maximize the capabilities this product offers.
