![background image](http://html1.mh-extra.com/html/minn-kota/1810220/1810220_manual_1802855001.webp)
1 | minnkotamotors.com
©2020 Johnson Outdoors Marine Electronics, Inc.
TALON SETBACK BRACKET - 6”
1810220
TOOLS AND RESOURCES REQUIRED
Item /
Assembly
Part #
Description
Qty.
2
2378821
RISER BRACKET, 6",MACHINED
1
A
Items 4-10
2994918
BAG ASY,TALON 6" SETBACK BRKT
1
4
2373521
BOLT-5/16-18 X 1 1/2" HHCS SS
4
6
2371746
WASHER .750 X .3125 SS
8
8
2223100
NUT-5/16-18 NYLOCK S/S
4
10
2378608
ANTI SEIZE TUBE, 4CC, TALON
1
p
2374929
INSTRUCTION SHEET,SETBACK BRKT
1
2
2
A
A
4
4
6
6
8
8
• #3 Phillips Screw Driver
• Drill
• Scissors
• 17/64” Drill Bit
• 7/16” Box End Wrench
• 33/64 (.516”) Drill Bit
• A second person to help with
the installation
p
Not shown on Parts Diagram.
✖
This part is included in an assembly and cannot be ordered individually.
The Talon Setback Bracket provides six inches of additional setback for direct-transom mount applications. This provides extra clearance for
accessories, such as trim tabs and ladders.
10
10
MOUNTING CONSIDERATIONS
NOTICE:
The Setback Bracket should only be used on
direct-mount applications. Using a setback bracket along
with any adapter bracket is not recommended and will void
your adapter bracket warranty.
NOTICE:
To prevent seizing of the stainless steel hardware,
do not use high speed installation tools. Wetting the screws
or applying an anti-seize may help prevent seizing.
NOTICE:
If directly mounting the Setback Bracket to the
Transom, please refer to the “Installation” section of the
Talon Owner’s Manual or Installation Instructions. They can
be found online at
Complete Typical Installation