5
ELECTRICAL CONNECTIONS
NOTE: This fan includes a WC105 wall control. If you are to add a light
kit you would need to purchase the WC106 wall control. (Available at your
Minka-Aire
®
retailer.)
NOTE: If you feel that you do not have enough electrical wiring knowledge
or experience, have your fan installed by a licensed electrician.
Use the wire nuts supplied with your fan. Secure the connectors with
electrical tape and make sure there are no loose connections or wire
strands.
1. Connect the wiring from the fan motor to house supply. (Fig. 11)
Connect the RED live supply wire to the BLUE fan light wire.
Connect the BLACK live supply wire to the BLACK fan live wire.
Connect the WHITE neutral wire to the WHITE fan neutral wire.
Connect the COPPER house ground wire to the GREEN fan ground wire.
2. After connecting the wires, spread them apart so that the green and
white wires are on one side of the outlet box and the black wires are on
the other side.
3. Connect the wiring from the wall switch receptacle to wall control
unit. (Fig. 11)
Remove the existing wall plate and switch from the wall junction box.
Connect one BLACK wire from the wall to one BLACK wire (labeled "TO
FAN") from the wall control.
Connect the other BLACK wire (labeled "TO POWER SUPPLY") from the
wall control to the remaining BLACK wire from the wall (A/C supply
source).
4. If your junction box has a ground wire (green or bare copper), connect
the wall control's ground wire to it. Otherwise, connect the wall control
ground wire directly to one of the screws from the outlet box.
