
WARNING: only one Minirig or Sub per USB plug
CHARGING
BLUETOOTH RECEIVER MODE
Plug the round end into the Minirig
power socket. Ensure you push it
in firmly to make the connection.
Next insert the USB plug end into any
powered USB socket.
USB sockets can be found on most
computers and mobile phone chargers.
WHEN ON CHARGE, THE LED WILL FADE ON IN A REPEATING 2 SECOND CYCLE. THE COLOUR REPRESENTS THE BATTERY LEVEL.
A FULL CHARGE WILL TAKE 2-3 HOURS. ONCE THE BATTERY IS CHARGED, THE LED WILL STOP THIS REPEATING CYCLE.
WHEN THE MINIRIG IS ON, THE COLOUR OF THE LED WILL INDICATE THE BATTERY LEVEL.
GREEN: 75-100% CYAN: 50-75% BLUE: 25-50% PURPLE: 5-25% RED: 0%
When the MRM is OFF you can check the battery status by pressing the button once (do not press and hold). At any time you
can charge the Minirig using the supplied power cable
home
Your MRM can be used as a Bluetooth reciever where it will output stereo audio via the 3.5mm jack. To enable this mode you need
to connect your chosen device (e.g. headphones or Hifi) then press the MUTE button on the app to mute the speaker and enable
stereo output.
LINE IN