13
■
■
■
①
②
※
※
※
■
00
00 : 00
Km/h
VOL
3
TRIP ODO DST TIME CHA
P0
00 : 00
Km/h
3
SINCE 1999
MINIMOTORS
P3
0
Km/h
SINCE 1999
MINIMOTORS
98
%
TRIP ODO DST TIME CHA
SET RPM OFF
SINCE 1999
MINIMOTORS
98
%
P0
P 1
P2
P3
P4
P9
P5
P6
P8
P7
PA
PC
Pb
PbP0
PE
13
5~100%
1(MAX SAVE)
2(MID SAVE)
3(NO SAVE)
0(OFF)
1(ON)
0(UNLOCK)
1(LOCK)
0(OFF)
1(ON)
60
15
0
0(Km/h), 1(mp/h)
(Fixed)
Caution
Start method
PE function (Rear motor lock setting)
The rear motor lock function (throttle :PD) is not activated at the factory.
Features of cruise mode (automatic driving)
The cruise control function allows you to maintain the driving speed automatically. Take advantage of cruise
features The advantage of being able to reduce fatigue when traveling long distances and to increase mileage of
driving due to constant speed driving.
When the rear PE sensor is connected, the standby current is consumed even if the throw-off phase PE function is turned off.
(For long term storage and uncharged, be sure to disconnect and store the connector of the rear motor sensor to prevent the
discharge of the product in advance)
If you turn off the power after setting the PE function, the PE function works. The PE function is automatically canceled when
the power is turned on again.
* To improve the quality and safety of connector and rear motor locking sensor, the part colors and specifications can be changed
without notification.
How to active PE function (Rear motor lock setting)
1. When you open the pedal of the product, the rear motor sensor (white) is located in the right
space which connects the stem headset and the chassis. To activate the function, connect the
disconnected connector.
2. After connecting the connector, reassemble the pedal and set the throttle PE function to “1(LOCK)”.
The start of the cruise function
Select the Cruise Mode section in the instrument panel and let go of the throttle for approximately 7 seconds.
The cruise function will start.
End of cruise function
When you hold and release the brake while cruise mode is in effect, the cruise mode is
automatically released
Precautions when using the cruise function
In case of cruise function, please ride in a position where brake can be used immediately so that cruise function is
canceled and braking is possible in preparation for safety situation while driving.
This product is always operated in dual drive mode and
cancel of cruise mode is possible through throttle and brake.
Cancel of cruise mood through throttle is not recommended.
Electronic brake power Electronic brake power
Auto off time setting
Rear motor lock setting
ABS setting
Max output setting
Cruise mode
Safety start
Battery save
0(Acceleration start)
1(Kick start)
0 (Off)
~ 5 (Powerful)
0 (Off)
~ 5 (Brightest)
5-30 minutes
5 (Fixed)
(User adjust)
(Fixed )
Dualtron X User Manual
(Fixed )
(Fixed )
Speed unit
