Minimotors DUALTRON ULTRA II, Руководство пользователя

Страница: 16 / 24

Dualtron Ultra II User Manual
How to use a charger correctly
2) Basic charging method
* Failure of the charger and abnormal conditions can cause
electric shock and fire. Learn the correct usage and prevent safety accidents in advance.
* Short-circuit Caution:
Be careful not to short-circuit the battery because short-circuiting of the battery is very dangerous.
* Overcurrent Note:
The battery of this product is designed to automatically shut off the
power supply to protect the battery when the over current is over 100A.
* Low Voltage Caution:
The battery of this product is designed to be automatically shut off when
the voltage drops below 48V. Do not use the product in the low voltage state.
5. If the charger lamp does not light,
charger fall, strong external
shock, long time charge, or cable
cover damage, discontinue use
immediately and contact the service
center.
6. Unplug the charger when you are away from
the home for long periods of time.
1.Manufacturers and sellers are not
responsible for any problems
arising from any disassembly,
modification, or mixing with other
chargers.
2. The charger is forbidden to be used
in places subject to high humidity,
heat, flammable materials,
confined spaces, or where there
is no ventilation such as in a car.
3. The charger is not waterproof. It is
thoroughly controlled to prevent
moisture from entering the
charger.
4.Children and pets should not be
allowed to approach the charger
when they come into contact
with them, as they may cause an
electric shock.
7. Use only genuine charger.
8.Do not insert conductors into the charging port.
9.Do not touch the plug for about 10 seconds after unplugging the charger. There is a risk of
electric shock from instantaneous discharge.
10. Do not remove the terminal during charging. Charge the internal circuit of the charger and
cause malfunction.
11. Do not operate the product during charging.
12. Charging terminals should be firmly contacted during charging and should not be used if
terminals are corroded or damaged.
13. When disconnecting the charger from the product, it is safe to hold the terminal without holding the wire.
1) Basic charging method
1. Open the chargingport cap and connect
it to the connector of the charger and
connect it to the household outlet.
3. Be sure to close the chargingport cap when driving or storing except when charging.
4. When connecting the connector to the charging port, metallic sparks due to voltage
difference may be splashed, but this is normal
Warning
Caution
2. Charging status indicator (Red) Charging
(Green) Charging complete
16
Four-pin Charging Port
Three-pin Charging Port