08
Dualtron 3 User Manual
Dualtron 3 User Manual
09
DUALTRON
How to use the product
Product components
Checking the components inside of the box
Top : Default battery charger(1.7A), Default tool, User manual, Remote control
Bottom : Body(Lithum battery included)
Charger
Basic tool
Main body
LED Remote
control
Assembling of the instrument
panel, brake
-Locate the instrument panel and tighten
the fixing bolts.
-Adjust the position of the brake and
tighten the fixing bolts with a 5mm hexagon
wrench.
Make a note of the serial number.
The serial number can be used
to check information such as
date of purchase, warranty
period, etc., and product
information can be checked
even if the product is lost or
stolen.
(May vary depending on branch
office situation.)
Ejecting the productnumber.
Do not hold the handlebar only when lifting the
product from the box.
Please be careful that the fixing slide of the
folding part may be damaged, and a safety
accident such as a part of the body may be
caught.
Therefore, when lifting the product, it is
necessary to raise the handle bar first, and then
slowly lift the body (footrest) of the product with
both hands and do not damage the folding part
Caution
1) Productun folding
3. Handlebar unfolding
4.Locking the handle
QR lever
Locking slide
locking slide
QR lever
1. Raise the handle post(Steering tube)
2. Locking the folding parts
QR lever
Finishing screw
Locking slide
Tighten the finishing screw properly to
lock the QR lever so that the locking
slide is firmly fixed in any direction, and
check for looseness during use.
Release the QR lever, raise the locking
slide upwards, raise the handle post,
then lower the locking slide downward.
Loosen the QR lever, pull the locking
slide inward and raise the handlebar,
then close the QR lever and tighten the
set screw.
Place the locking slide up to the safety
line and lock it so that it is firmly fixed with
the QR lever. Always check for looseness
during use.
*CAUTION : Make sure that the fixing slide
is inserted to the safety wire when fixing.
