MINIMOTO
™
MAXII BIKE
9
STEPS TO CHARGE BATTERY:
The port for the charger is located on the
upper body. It resembles a
simulated”FUEL CAP”.
1) Slide the protective cover over to
expose the charger port (Fig 11).
2) Note that the plug has a “groove”
inside (Fig 12). This allows the plug to be
inserted in the proper orientation to the
wires. Plug the charger into the port.
3) Plug in the charger into a standard 120
Volt electrical outlet.
4) When properly charging, THE Green light
flash on and off on the charger will be ON.
MAKE SURE THE ANY SWITCHES CON-
NECTING THE ELECTRICAL OUTLET ARE
SET TO THE ON POSITION.
5) Before using the MINIMOTO
TM
MAXII
BIKE for the first time, charge the battery
for at least 12 hours. Never charge the
battery for more than 30 hours.
6) When the battery is fully charged. The
Green light on the charger will come on. It
is recommended that you always recharge
the battery for a period of 8 hours.
However, 80% of the power will be charged
into the battery in 4 hours. It is possible
to use the MINIMOTO
TM
MAXII BIKE after
this period but the total running time will
be reduced.
Fig 11
Fig 12
GROOVE
Country
Input
Output
Polarity
Shape
A.C. 100-120V
60Hz
d.c. 36V 2000mA
U.S./Canada
Taiwan/Japan
A.C. 220-240V
50Hz
d.c. 36V 2000mA
U.K./Hong Kong/
Singapore/Malaysia/
Africa
A.C. 220-230V
50Hz
d.c. 36V 2000mA
Europe/Germany/
Israel
A.C. 240V 50Hz
d.c. 36V 2000mA
Australia/
New Zealand/China
Bare
Bare
Bare
Bare
Battery Charger specifications for world-wide standard:
