MINIMEX MDC3, Инструкция по эксплуатации

Страница: 16 / 21

- 7 / Eng -
DELAY FUNCTION
f you do not want the coffee maker to start operation immediately, for example now it is 8:00,
you hope that the coffee maker will automatically start working at 13:00, first follow steps 1 to 5
of
“USING YOUR COFFEE MAKER”
, and then you can set the automatic start function as
follows:
1. Follow the steps 6 to 7 of
“USING YOUR COFFEE MAKER”
set the current time that is 8:00.
NOTE :
The time cycle is 24 hours.
NOTE :
You may cancel the automatic start function by press to the
“PROG”
setting
again. If you want to change the automatic start time, only following the
above steps 2-3 again.
2. Press to the
“PROG”
setting, the PROG indicator blinks in green, and the LCD display
indicates “12:00” .
3. Follow the steps 6 to 7 of
“USING YOUR COFFEE MAKER”
set the automatic start time that
is 13:00.
4. After setting the automatic start time, press to the
“PROG”
setting, the PROG indicator
illuminates in green solidly. After a while, the LCD display indicates the current time.
NOTE :
Pay attention to pour the coffee out, otherwise you may be hurt as the
temperature of coffee just finished is high.
5. When the time is due, the ON/OFF indicator will illuminate in red and the appliance starts
brewing. When the process is finished, if you do not want to serve immediately,
keep the coffee maker be energized, the coffee can be keep warm on the warming plate.
And the appliance will shut off automatically after 40 minutes from the ON/OFF setting being
activated if it has not been manually disconnected at the completion of brewing. For an
optimum coffee taste, serve it just after brewing.
NOTE :
During delay brewing process, the settings of “HOUR” and “MIN” are invalid.