miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
18
4.
Then navigate to the calibration file in your file system and select it. Choose the on-axis or 90-degree file
according to the type of measurement you are doing.
5.
Open REW Preferences (spanner icon at top right). Confirm that the UMIK-2 is selected for input. Here
you can also select the output device.
6.
Click on the Cal Files tab and confirm that the calibration file is loaded for the UMIK-2. It should be
selected for the MICROPHONE device as shown below.
If you wish, you can select it for the top input shown as well.
This corresponds to the “Default” input
selection.
