mi niDSP Ltd, Hong Kong /
/ Features and speci fi cations subject to change wi thout pri or noti ce
23
4.1
C
ONNECTING TO A
PWR-ICE
AMPLIFIER
To connect to an amplifier, expand the “Ethernet Device” node of the Device Tree, as shown below. (If you have
more than one amplifier, you can rename each of them after connecting to it – see
.)
Click on the name of the desired amplifier. The following dialog will appear. The first time you connect to an
amplifier, select the Restore Config option, to ensure that the amplifier contains a proper set of default settings.
(On subsequent connections, if this dialog appears, you will usually select Use onBoard Config or Synchronize
Config. See
below.)
The plugin will download settings to the selected amplifier. Once connection is complete, the screen will update
to show the connected amplifier:
The connected amplifier is now “live” and any changes made in the user interface will be immediately
downloaded to it. This is referred to as online mode.
The first time you connect to an amplifier, we recommend that you go to the Restore menu and
select the Factory Default option. This will ensure that all configuration presets are set to a proper
initial state.
