miniDSP MINISHARC, Руководство пользователя

Страница: 12 / 47

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice
12
2.4 J1
EXPANSION HEADER
The user-accessible pins in the J1 header are listed in Table 2 below. Only a small number of pins are intended to
be user-accessible. Please do not connect to any pins marked “—”.
Table 2. J1 expansion header pinout
Pin Function Pin Function
1 — 2 —
3 GND 4 GND
5 GND 6 GND
7 — 8 I2S input slave select (pull low)
9 I2S output slave select (pull low) 10 —
11 — 12 —
13 — 14 —
15 — 16 —
17 — 18 —
19 — 20 —
21 — 22 —
23 — 24 —
25 — 26 —
27 — 28 —
29 — 30 —
2.5 J2
EXPANSION HEADER
The user-accessible pins in the J2 header are listed in Table 3 below. This header contains all of the I2S input and
output signals.
Table 3. J2 expansion header pinout
Pin Function Pin Function
1 SPDIF RX (3.3V compliant) 2 SPDIF TX (3.3V compliant)
3 LRCLK_SPDIF (Not used in current firmware) 4 BCLK_SPDIF (Not used in current firmware)
5 GND 6 GND
7 GND 8 GND
9 MCLK 10 I2S_DATA_IN1&2
11 I2S_DATA_IN3&4 12 I2S_DATA_IN5&6
13 I2S_DATA_IN7&8 14 I2S_IN_LRCLK
15 I2S_IN_BCLK 16 I2S_DATA_OUT1&2
17 I2S_DATA_OUT3&4 18 I2S_DATA_OUT5&6
19 I2S_DATA_OUT7&8 20 I2S_OUT_LRCLK
21 I2S_OUT_BCLK 22 3.3V
23 GND 24 3.3V
25 GND 26 GND
27 NC 28 NC
29 NC 30 NC