miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
16
3.2.5
Remote
The wire remote can be positioned anywhere in the vehicle and is connected via the supplied cable. The RJ11
plugs on each end simply plug into the base of the remote and into the rear panel of the C-DSP 6x8. The wired
remote also contains the receiver for infrared remote control.
3.2.6
USB
To configure the processor, connect its USB port to a USB 2.0 port on your computer using the supplied cable.
Note that USB is used only for configuration—audio data cannot be streamed to the processor over USB.