QUICK START GUIDE
6
7.1
Serial Setting
Click Serial Setting, the following appears.
Figure 5 Serial Setting
Port Alias: Give the port an identifying name to be identified by the connected
device.
Select the Interface: RS232 / RS422 / RS485 (2-wires) / RS485(4-wires)
Select the settings for Baud rate, Data Bits, Stop Bits, Parity and Flow Control.
Force TX interval time is to specify a timeout when no data has been transmitted.
When the timeout is reached or TX buffer is full (4K Bytes), the queued data will be
sent. Zero (factory default) means disabled.
Performance options: Select Throughput for the fastest possible transmission speed.
Select Latency for the shortest response time.
