3. Run the rope through both parts of the
trampoline (see fig. 2.), tighten it firmly and lock
with a knot. This way, the whole frame is
tightened.
4. Run the unpacked empty floats through the
two belts, in the right direction, on both sides of
the frame (fig.3).
Before inflation, check the status of the valves.
Set the valves to the closed position, slightly
push on the centre pin, turn the pin and release
the pressure on the pin to enable it to sit in the
higher position.
To inflate your MiniCat there use the pump
supplied. Inflate the floats partially and align
them into position. Then inflate the floats fully to
their operating pressure.
3.
Opening
the valve
Air
Air
Closing the valve
Front
Back
5. Assemble the central tube from tubes No.1
and 2 and attach it, using the washers to the
frame so that the shorter tube No.2 will be in the
rear part of the frame. Make the connection as
shown in fig. 4.
6. Put together the three-part mast the single
sections of the mast are simply inserted into
each other (fig.5).
4.
2.
3
Содержание 2012 310.SPORT
Страница 1: ......