Mini XQB25-725H, Инструкция по эксплуатации

Страница: 10 / 11

E 1
E 2
E 3
E 4
E 5
E 6
E 7
H S
2.5KG
220W
390*420*720
(mm)
17KG
1
：
13L
2
：
18L
3
：
25L
4
：
32L
C H
220W
TROUBLESHOOTING/SPECIFICATIONS
Troubleshooting
Function of fault alarm and flash
Exceptional
phenomenons
Cause
Sensor of water
lever series
Solution
No indication
in controller
The power plug is not plugged tight,
the Power switch is not switched
No display
No display
Re-plug the power plug,
press”POWER”button
Power socket no electricity or
fuse disconnection
Check the power socket or fuse
After the failure Of electricity
supply, it need to re-operation
After the electricity, Wash Rinse
Spin Normal four indicator lights up
After the electricity,
please re-operation
Overhigh voltage or low voltage Low voltage no display, overhigh
voltage may cause the fuse damaged
Pull the plug, use after the
voltage return to normal
Enter water
failure
Have not open the tap, stop water, low water pressure,
water have not reach the set water level after 20minutes
Open the tap, Clean the netting according to
the method of “Cleaning the water inlet”
Drain failure
The drain house is placed too high or have not lay down
the drian hose. The drain hose is wrung or jammed.
Check the drain hose, lay the drain hose lowly, press
“Start/Pause” button after checking. Open the machine
cover and close the machine cover for alarm free
Open abnormal Safety lid is open
Closed the lid
Touch the
shell during
the spinning
Cloth are uneven in tub causes its unbalance and rub
the shell. Washing machine will adjust itself. After twice
adjustment,if it still in unbalance,it will Be warning.
Open the lid, put clothes well, close the lid
Overhigh
water level
Water level up on the highest safety water level
PCB can Auto-precess
Sensor of water
lever abnormal
Stage frequency less than high water level limit
or exceed than low water level limit, will shows
sensor of water lever error alarm
Please ask professional person to check
Pause
abnormal
Pause time exceed 10 minutes
Please press the “start” button
Water
recycling
The water recycling program group the last time
before dehydration tips
Open and close the cover or press the start button
Tub self-clean
tips
The indicator shows tub self-clean tips Please press the “start” button
Fault cause and solution for the washing machine without digital display are same as above, the alarminstructions are as follows:
Enter water failure: wash, rinse, spin indicator flash; Drain failure: Wash Rinse indicator flash; Spin abnormal: Rinse, Spin indicator
flash; Touch the shell during the spinning ; Wash, spin indicator flash; Sensor of water lever abnormal: Water level indicator flash.
Notes: Automatic adjustment is to stop spinning and change to reverse frequently cloth to make even. Too much or too
little cloth, or putting washing machine not in horizontal level, it will cause spinning in unbalance. It will automatic
adjustment and increases rinsing times.
Specifications
Model Voltage Capacity
Rated wash power
Rated spin power
Water level
Water Volume
Net
Weight Product size
Noise
Noise
≤
70db
Feed water
pressure
Water Proof
XQB25-725H
220V/60Hz
9