MAIN MENU
Press red key to enter the edit window , Press
PR + ,PR - keys to select sub -menus , and press
keys to move highlight to choose your
choice .
Press green key it will pop up a window as beside . If
you choose Yes , the event you selected will be
deleted , if you select EXIT , you will quit without
delete the event .
5.5 SW Update
This menu has two sub -menus :
-
Update by USB /Card Reader
-
Box to Box
1) Update by USB /Card Reader : Press OK key
to pop up the SSU window as beside . You can
select the update file in right of the window, and
press OK key to start update , if there is no update
file in the USB device it will show No file !
2) Box to Box : Press red key to select the target
between STB and PC .
Press green key to select mode among code only,
Database only, Code and database .
Press OK key to restart . You can see the
transmission and burn bar in this window .
Press EXIT key to exit .
5.6 Set Default
When you choose the option of Set Default and
press [OK ] key, there will be a dialogue ask you :
Set factory default ? You will see a screen like
beside .
If you choose Yes , all the parameters of this
receiver will reset to the default value .
Note : Please use this function carefully.
17
