Mini COOPER SE, Руководство пользователя

Страница: 228 / 286

– If the vehicle has not moved again for at
least 2 hours after a trip.
1. Determine the intended tire inflation
pressure levels for the mounted tires.
2. Check the tire inflation pressure in all
four tires, using a pressure gage, for ex-
ample.
3. Correct the tire inflation pressure if the
actual tire inflation pressure deviates
from the intended tire inflation pres-
sure.
4. Check whether all valve caps are
screwed onto the tire valves.
After correcting the tire inflation
pressure
For run-flat tires: reinitialize run-flat tires.
For the Tire Pressure Monitor TPM: reset
the Tire Pressure Monitor TPM.
Tire pressures
To achieve optimum driving comfort, note
the tire inflation pressure specifications in
the Tire inflation pressure table, refer to
page 228 , and adjust as needed.
These pressure values can also be found on
the tire inflation pressure label on the driv-
er's door pillar.
Do not exceed a speed of 100 mph/
160 km/h.
Tire pressure values
COOPER SE
Tire size Pressure specifications
in bar/PSI
Specifications
in bar/PSI with
cold tires
195/55 R 16 87
W
195/55 R 16 87
H M+S
2.4 / 35 2.2 / 32
205/45 R 17 88
V XL A/S
205/45 R 17 88
W XL
205/45 R 17 88
V XL M+S
2.6 / 38 2.4 / 35
175/60 R 16 86
H XL M+S
185/50 R 17 86
H XL M+S
2.8 / 41 2.6 / 38
Tire identification marks
Tire size
205/45 R 17 84 V
205: nominal width in mm
45: aspect ratio in %
R: radial tire code
17: rim diameter in inches
84: load rating, not for ZR tires
V: speed rating, before the R on ZR tires
Seite 228
MOBILITY Wheels and tires
228
Online Edition for Part no. 01405A02680 - II/20