Mini Convertible Cooper, Руководство пользователя

Страница: 113 / 264

WARNING
Improperly executed work can lead to
failure, malfunction or unintentional triggering
of the system. In the case of a malfunction, the
system could not trigger as intended in the
event of an accident despite respective acci‐
dent severity. There is a risk of injuries or dan‐
ger to life. Have the system checked, repaired,
dismantled and scrapped by a dealer’s service
center or another qualified service center or re‐
pair shop.
◀
WARNING
After triggering or damage, system func‐
tionality is limited or not available anymore.
There is a risk of injuries or danger to life.
Have the system checked and replaced by a
dealer’s service center or another qualified
service center or repair shop in the event of
triggering of or damage to the system.
◀
WARNING
With an extended rollover protection sys‐
tem, the area of movement of the convertible
top is limited. There is risk of injuries or risk of
property damage. When the rollover protection
system is extended, do not move the converti‐
ble top.
◀
Overview
Covers of the rollover protection system
Malfunction
A Check Control message is displayed
when there is a malfunction.
Tire Pressure Monitor
TPM
The concept
The system monitors tire inflation pressure in
the four mounted tires. The system warns you if
there is a significant loss of pressure in one or
more tires. For this purpose, sensors in the tire
valves measure the tire inflation pressure.
General information
With use of the system observe further infor‐
mation found under Tire inflation pressure, re‐
fer to page
192 .
Functional requirements
The system must have been reset with the cor‐
rect tire inflation pressure; otherwise, reliable
signaling of tire pressure loss is not assured.
Reset the system after each adjustment of the
tire inflation pressure and after every tire or
wheel change.
Always use wheels with TPM electronics to en‐
sure that the system will operate properly.
Status display
The current status of the Tire Pressure Monitor
TPM can be displayed on the Control Display,
for instance whether or not the TPM is active.
Via the onboard monitor:
1. "Vehicle info"
2. "Vehicle status"
3. "Tire Pressure Monitor (TPM)"
The status is displayed.
Seite 113
Safety
CONTROLS
113
Online Edition for Part no. 01 40 2 915 102 - X/16