Mini Convertible Cooper, Руководство пользователя

Страница: 115 / 264

▷ No reset was performed for the system. The
system issues a warning based on the tire
inflation pressures stored during the last re‐
set.
In these cases:
1. Reduce your speed and drive moderately.
Do not exceed a speed of
80 mph/130 km/h.
2. At the next opportunity, e.g., gas station,
check and correct the tire inflation pressure
in all four tires, if necessary.
3. Reset the system.
Message in case of sharp tire inflation
pressure loss
The yellow warning lamp lights up.
A symbol with the affected tires will be
displayed in the Check Control mes‐
sage.
▷ There is a flat tire or a major loss in tire in‐
flation pressure.
▷ No reset was performed for the system. The
system issues a warning based on the tire
inflation pressures stored during the last re‐
set.
In these cases:
1. Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneu‐
vers.
2. Check whether the vehicle is fitted with
normal tires or run-flat tires.
Run-flat tires, refer to page
200 , are la‐
beled with a circular symbol containing the
letters RSC marked on the tire's sidewall.
WARNING
A damaged regular tire with low or miss‐
ing tire inflation pressure impacts handling,
such as steering and braking response. Run-flat
tires can maintain limited stability. There is a
risk of an accident. Do not continue driving if
the vehicle is equipped with normal tires. Fol‐
low the information on run-flat tires and con‐
tinued driving with these tires.
◀
A low tire inflation pressure might turn on DSC
Dynamic Stability Control.
Actions in the event of a flat tire
Normal tires
1. Identify the damaged tire.
Check the air pressure in all four tires, for
instance using the tire pressure gage of a
tire repair kit.
If the tire inflation pressure in all four tires is
correct, the Tire Pressure Monitor may not
have been initialized. In this case, initialize
the system.
If identification of flat tire damage is not
possible, please contact a dealer’s service
center or another qualified service center or
repair shop.
2. Repair the flat tire, for instance with a tire
repair kit or by changing the tire.
Use of sealant, for instance from the tire repair
kit, may damage the TPM wheel electronics. In
this case, have the electronics checked and re‐
placed at the next opportunity.
Run-flat tires
Maximum speed
You may continue driving with a damaged tire
at speeds up to 50 mph/80 km/h.
Continued driving with a flat tire
If continuing to drive with a damaged tire:
1. Avoid sudden braking and steering maneu‐
vers.
2. Do not exceed a speed of 50 mph/80 km/h.
3. Check the air pressure in all four tires at the
next opportunity.
Seite 115
Safety
CONTROLS
115
Online Edition for Part no. 01 40 2 915 102 - X/16