Mini 2009 Clubman, Руководство пользователя

Страница: 122 / 160

Re
p
la
c
ing co
mp
o
n
en
ts
120
Liquid sealant
1 Filling hose
2 Filling canister
Filling
1. Shake the filling canister.
2. Screw the filling hose onto the filling canis-
ter.
3. Unscrew the dust cap from the valve of the
defective tire.
4. Screw out the valve core with the valve
remover. The valve remover is located in a
package with the filling hose.
5. Remove the cap from the filling hose.
6. Push the filling hose onto the tire valve.
7. Hold the filling canister with the cap down
and squeeze.
8. Squeeze the entire contents of the canister
into the tire.
9. Remove the filling hose.
10. Screw the valve core into the tire valve with
the valve remover.
In the event of a lost or dirty valve core
you will find another valve core in the
package with the filling hose.
Remember that the liquid canister must be
replaced every four years if the equipment has
not been used.
<
Compressor
1 Hose with manometer
2 Compressor
3 Connector for power supply
Reinflating the tire
1. Screw hose 1 with manometer onto the tire
valve.
2. Insert connector 3 into the lighter socket in
the interior of the vehicle, page 81 .
3. Switch on compressor 2 .
4. Inflate the tire to at least 26 psi/180 kPa and
at most 36 psi/250 kPa.
To check the air pressure, shut off the device
for a short time.
Do not run the compressor for longer
than 6 minutes, otherwise the device
will overheat and possibly be damaged. <
If an air pressure of 26 psi/180 kPa is not
reached:
1. Unscrew hose 1 and drive the vehicle for-
ward and backward about 33 ft/10 m to dis-
tribute the liquid sealant in the tires evenly.
2. Repeat the procedure.
If an air pressure of 26 psi/180 kPa still can-
not be reached, the tire is too severely dam-
aged. Please contact the nearest MINI Dealer. <
Distributing liquid sealant
Immediately drive for approx. 10 minutes, so
that the liquid sealant is uniformly distributed.
Do not exceed speeds of 40 mph/
60 km/h.
If possible, do not drop below 10 mph/
20 km/h.
<
PDF Decrypter Trial
Website : http://www.softlay.org