Mini Pro Chassis Dyno V2, Инструкция по эксплуатации

Страница: 9 / 24

8
Install the bearing holders to the side covers *
ASSEMBLY GUIDE
3
Part II. Roller Holder Assy.
2.0mm
Tools
Note: Make sure you install (2) left side and (2) right side bearing holders.
Install rollers, side covers, upper deck, and L-shape brackets *
4
* For 2WD models, only (2) two bearing holders and (1) one roller are installed.
3.0mm
Build Time: 20min
3.1. Make sure the bearing is installed on the bearing holder.
3.2. Install the bearing holder on the Side Cover using (2) M3x6mm hex screws
3.3. Repeat the process for the remaining side covers. Make sure you install (2)
left side and (2) right side.
(2) Left Side Cover
(2) Right Side Cover
Bearing
Holder *
(4) Side Covers
Upper Deck
FR. L-Bracket
Roller
(4) M5 x 12mm Screws
(4) M3 x6mm Screws
4.1. For 2WD Models see page 8 and skip step 4.2.
4.2. Insert the roller’s smallest shaft on the right
side cover bearing, and the larger shaft on the left
side cover bearing.
4.3. Install the FR. and RR. L-brackets to the both
side covers with the (4) M3 screws.
4.4. Install the Upper Deck on the side covers
using (4) M5 screws.
RR. L-Bracket
Small Shaft
Right Side Side Cover
Left Side Cover
CONT.
Note: Do not overtighten the screws.