2
Version 2.0
GETTING TO KNOW YOUR VAUSB
OPERATING THE VAUSB
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before
using.
IMPORTANT NOTE: Soft-spoken voices may not record as well as
louder ones. We recommend not keeping the device in your bag or
pocket while recording. Hanging the device from a lanyard around
your neck, belt loop, bag, etc. will produce the best results.
HOW TO CHARGE VAUSB
1.
Make sure the USB port is in the extended position.
2.
Plug the device into the USB port of your computer.
o
The indicator light will blink red while charging.
o
When the device is fully charged, the indicator light
will be solid red.
NOTICE: The indicator light is hard to see. You may need to cup your
hand against the device to see the light properly.
HOW TO START AUDIO RECORDING
1.
Push the recording switch into the ON position.
o
The indicator light will turn blue. This may take a few
seconds.
o
The device is now recording audio.
NOTICE: Since the USB is voice activated, it will automatically stop
recording if the voices are too quiet. When the voices rise in volume,
the device will automatically resume recording.
HOW TO STOP AUDIO RECORDING
1.
Push the recording switch to the “Off” position.
o
The indicator light will turn off.
o
The audio file is automatically saved.
