OPERATING THE VADVR1000
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before
using.
HOW TO CHARGE THE DEVICE
USING YOUR COMPUTER
1.
Insert the USB cable into the USB Port of the device
2.
Insert the USB cable into the USB Port of your computer
The red indicator light will turn on while charging
USING POWER ADAPTER
1.
Insert the power adapter into the USB Port of the device
2.
Insert the power adapter into a power socket
The red indicator light will turn on while charging
USING THE CAR ADAPTER
1.
Insert the car adapter into the USB Port of the device
2.
Insert the car adapter into the charging port of your vehicle
The red indicator light will turn on while charging
TIP: If the blue indicator light is flashing the battery is low and the
device will automatically shut down after 2 minutes
HOW TO TURN THE DEVICE ON/OFF
1.
Move the Power Switch into the ON position
The blue indicator light will turn on
TIP: If the green indicator light is flashing you need to insert a
MicroSD Card into the MicroSD Card slot
HOW TO RECORD VIDEO MANUALLY
1.
Ensure you have inserted a MicroSD Card into the MicroSD
Card slot
2.
Ensure the Voice Activation Switch is in the OFF position
3.
Press the Record button
The green indicator light will flash while recording
4.
To stop recording press the Record button again
Your video has been saved
TIP: If the green indicator light stays on in recording mode the
MicroSD Card is full
HOW TO RECORD VIDEO USING VOICE ACTIVATION
1.
Ensure you have inserted a MicroSD Card into the MicroSD
card slot
2.
Move the Voice Activation Switch into the ON position
3.
When sound is above 65 decibels the device will automatically
begin recording
The green indicator light will flash while recording
4.
After 2 minutes if no sound is detected the device will enter
standby mode
5.
After recording the device will automatically save your video
IMPORTANT NOTICE: If the device loses power during recording
your video will not be saved
