OPERATING THE BLACK AND YELLOW WATCH
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before
using.
HOW TO CHARGE THE WATCH
Using the AC Adapter
1.
Plug either end of the USB cable into the USB jack on the
watch and the USB port on the adapter
2.
Plus the adapter into a power outlet
The blue indicator light will blink while charging
The green indicator light will come on when fully
charged
HOW TO WATERPROOF THE WATCH
WARNING: Even though the watch is waterproof, we do not advise
you go swimming or diving while wearing this watch. Rain,
showering, and washing your hands are safe water limits.
To waterproof the watch, make sure the closed nut is on the
microphone. Simply unscrew either of the nuts and switch them with
each other. Be aware that the microphone will not record while
covered.
HOW TO RECORD VIDEO
1.
Push and hold the Record/Stop button for 3 seconds
The green indicator light will come on > blink several
times > turn off
The watch is now recording live video
If the recording time is over 60 minutes, the watch will
automatically save the file and start a new recording
2.
Push the Record/Stop button
The watch will stop recording and save the file
The blue indicator light will turn on
HOW TO TAKE PHOTOGRAPHS
1.
Push the Record/Stop button 3 times in a row
The blue and green lights will blink alternately
2.
Push the Record/Stop button once
The blue light will blink rapidly
Two photos are taken at a time
3.
Push the Record/Stop button 3 times in a row
The blue light will come on
The watch is back in standby mode
HOW TO SET THE NEW RECORDING TIME STAMP
1.
Plug the watch into your PC using the USB cable
2.
Insert the software disk into your PC
3.
Open the disk drive
4.
Right click > Copy the “TIMECFG” text file
5.
Go to Start > Computer > Removable Disk
6.
Right click > Paste into the space beside the DCIM folder
7.
Open the text document
8.
Adjust the time and date to reflect the current time and date
9.
Save the text document
10.
Unplug the watch from your PC
Closed Nut
Open Nut
