OPERATING THE NIGHT VISION AND REMOVABLE
STORAGE WATCH
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before
using.
HOW TO CHARGE THE WATCH
Using the AC Adapter
1.
Plug either end of the USB cable into the USB jack on the
watch and the USB port on the adapter
2.
Plus the adapter into a power outlet
•
The blue indicator light will turn red while charging
HOW TO TURN ON THE WATCH
1.
Press and hold the ON/OFF button for 2 seconds
•
The red indicator light will turn blue and remain on
o
The watch is in
standby mode
HOW TO TURN OFF THE WATCH
1.
Press and hold the ON/OFF button for 2 seconds
•
The blue indicator light will blink 3 times
o
The watch is off
HOW TO INSTALL THE MICROSD CARD
1.
Unscrew the back cap of the watch by turning the cap counter
clockwise
TIP: A small tool such as a glasses
screwdriver might be necessary for
unscrewing the back cap. Gently push the
tip of the screwdriver against one of the
notches found around the edges of the cap.
2.
Remove the battery by gently pulling it towards your self
•
This will reveal the MicroSD card trap door
3.
Lift the trap door
4.
Place the MicroSD card in the bed
5.
Place the trap door back down and lock it
6.
Replace the battery
7.
Screw the back cap onto the watch
HOW TO RECORD VIDEO
1.
Ensure the watch is in
standby mode
2.
Push the ON/OFF button
•
The blue indicator light will blink 3 times and turn off
o
The watch is now recording live video
3.
Press the ON/OFF button
•
The blue indicator light will turn on
o
The watch stopped recording and saved the file
o
The watch is now
standby mode
HOW TO TAKE PHOTOGRAPHS
1.
Ensure the watch is in
standby mode
2.
Push the mode button
•
The blue indicator light will turn red and remain on
3.
Push the mode button
•
The blue and red indicator light will remain on
o
The watch is now in photo mode
4.
Push the ON/OFF button
•
The blue indicator light will blink once
o
The watch has taken a photo
5.
Push the mode button to return to
standby
mode