Updated 06/30/2016
2
Version 1.0
GETTING TO KNOW YOUR LMWIFIPOWER
OPERATING THE LMWIFIPOWER
BEFORE YOU START
1.
First you must download the PV Cam Viewer app from the
Google Play Store or the iPhone App Store.
o
Android:
https://play.google.com/store/apps/details?id=cam.ac
.com&hl=en
o
https://itunes.apple.com/us/app/pv-cam-
2.
If you wish to enable SD Card recording you must insert a
MicroSD card into the unit.
3.
To do so, remove the back panel to reveal the MicroSD card
slot.
CONNECTING TO YOUR DEVICE FOR LOCAL VIEWING
1.
Plug the device into an electrical outlet
o
NOTE: Device will automatically boot up into motion
detection recording mode as long as there is an SD
card in the unit when you plug it in.
2.
Turn WiFi on by sliding the WiFi switch to the left.
3.
A blue light will activate while the device is booting up.
4.
When the device is booted up, the red and orange lights will
flash on the back of the unit.
5.
Turn on your phone’s WiFi and look for the WiFi signal
generated by the device. The WiFi Signal name will match the
ID on the sticker on the bottom of the device.
6.
Once the device generates its WiFi signal, connect to it via the
WiFi settings on your phone. The password is 88888888
o
NOTE: Some Android devices may produce a warning
that the network has no internet access. If you see this,
choose to connect to the network anyway.
7.
After connecting to the WiFi Signal with your mobile device,
open the PV Cam Viewer App.
