OPERATING THE WIRELESS ENCRYPTED DIGITAL CAMERA
SYSTEM
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before
using.
SET UP
RECEIVER
1.
Insert the DC Power Adapter into the DC Input Port on the
Wireless Receiver
2.
Plug the DC Power Adapter into a power source
The red indicator light will turn on
3.
Insert the yellow AV cable into the Video Out Port
4.
Insert the white AV cable into the Audio Out Port
5.
Insert the other yellow AV cable into the Video In Port of your
TV monitor
6.
Insert the other white AV cable into the Audio In Port of your
TV monitor
7.
Open and adjust the Antenna
TIP: The camera and receiver should be set up between 50-100m
apart
CAMERA
1.
Insert the DC Power Adapter into the DC Input cable of the
Camera
2.
Plug the DC Power Adapter into a power source
3.
Point the Camera in the direction you want to monitor
HOW TO PAIR THE CAMERA AND THE WIRLESS RECIEVER
1.
Press the Pair Button on the Camera and then quickly (within
10 seconds) press the Pair Button on the Wireless Receiver
Video feed should appear on your monitor
2.
To pair another camera repeat step 1
TIP: If the video or audio is not working adjust the channel switch on
the Wireless Receiver
IMPORTANT NOTICE: To prevent interference do not place more
than one camera with the same frequency within the same 50-100m
area
