OPERATING THE HIGH DEFINTION EYEGLASSES
IMPORTANT NOTICE: Allow the device to charge 8 – 12 hours before
using. Do NOT charge for more than 12 hours.
HOW TO CHARGE THE EYEGLASSES
1.
Plug the USB cable into the USB port on the sunglasses
2.
Plus the USB cable into the USB port on your PC
The blue indicator light will turn on while charging
TIP: If the red and blue indicator lights flash three times and then
the eyeglasses turn off the eyeglasses need charging
HOW TO TURN ON THE EYEGLASSES
1.
Push and hold the Power Button for 2 seconds
The blue indicator light will turn on
The eyeglasses are now in
standby mode
If you do not use the eyeglasses for one minute, the
eyeglasses will automatically shut off
TIP: If the red and blue indicator lights are flashing you need to
insert a MicroSD Card into the MicroSD Card Slot
HOW TO RECORD VIDEO
1.
Put the eyeglasses into
standby mode
2.
Push and hold the Power Button for 3 seconds
The blue indicator light with blink 3 times and then
turn off
The eyeglasses are now recording live video
3.
Push the Power Button
The red indicator light will blink 3 times
The eyeglasses have now shut down
HOW TO TAKE A PHOTOGRAPH
1.
Put the eyeglasses into
standby mode
2.
Push the Power Button
The blue indicator light will blink once
The eyeglasses have taken a photograph
TIP: If there is a MicroSD Card in the MicroSD Card Slot and the red
and blue indicator lights are flashing the MicroSD Card is full
HOW TO RESET THE TIME AND DATE STAMP
1.
Plug the device into your PC using the USB cable
2.
Turn on the device
3.
Locate “Removable Disk” inside the (My) Computer folder
Go to Start > Computer > Removable Disk
4.
Open the Removable Disk drive
5.
Right click with your mouse
6.
Scroll down to “New”
7.
Click “Text Document”
8.
Rename “New Text Document” as “time”
The title must be in all lowercase letters!
