Manual Version 3.6.1
Check the specific product description of the item you purchased to
determine what type of storage it has and how your unit is
powered.
GET FAMILIAR WITH YOUR BUSHBABY2 REMOTE
OPERATING THE BUSHBABY2
IMPORTANT NOTICE: Allow the device to charge overnight before
using for the first time.
HOW TO TURN ON THE BUSHBABY2
1.
Press the Power Button while holding the remote about 2 feet in
front of the device.
The indicator light will turn on
o
If your BushBaby has internal storage, the light will
be on the back of the device.
o
If your BushBaby has removable storage, the light
will be near the MicroSD card slot.
The BushBaby is now in standby mode
o
Allow 5 seconds for initialization as the device will
ignore all commands until initialization is complete.
HOW TO RECORD VIDEO
1.
Ensure the device in is standby mode
2.
Press the Video Button
The indicator light will blink 3 times and then turn off
o
The BushBaby is now recording continuous video
HELPFUL TIP: Video records in 20-minute intervals until you manually
stop recording.
3.
Press the Video Button again to stop recording and return to
standby mode.
HOW TO USE MOTION DETECTION
1.
Ensure the device in is standby mode
2.
Press the Motion Detection Button
The indicator light will turn off when in motion detection
mode
When the camera detects motion, the indicator light will
blink three times and then turn off as recording starts
HELPFUL TIP: Video records in 3-minute intervals and then stops until
motion is again detected.
3.
Press the Motion Detection Button again to stop recording and
return to standby mode.
IMPORTANT NOTICE: The blinking motion detection indicator light
should not be an issue, as most electronic devices today have LEDs that
blink or flash. If this is an issue the indicator can be covered, but if the
indicator light is covered up, power and standby states cannot be
determined easily.
HOW TO TAKE PHOTOGRAPHS
1.
Ensure the device in is standby mode
2.
Press the Photo Button
The indicator light will blink once
The BushBaby has taken a photograph
Power Button
Photo Button
Motion Detection
Button
Video Button
IR
Transmitter
You must remove this
plastic tab before
operating the BushBaby
hidden camera