Mini Gadgets BBSCOFFEEPOT, Руководство пользователя

Страница: 3 / 8

OPERATING THE CAMERA
Note: If you are not located in the US, or if you intend to use this
product anywhere other than the US, you will need to purchase a
converter in order to use the AC wall plug in and avoid damaging the
product. Because different countries use different voltages in their
electrical wiring, you will need a converter that adapts to the current
in your particular country.
POWERING THE DEVICE
1. This device is powered by plug-in only. You will need to
connect the device’s power plug into a functional outlet in
order to operate the device.
HOW TO TURN ON THE CAMERA
1. Point the remote control towards the coffee pot, and press
the “Power Button” (see page 4). The indicator light
will turn
on.
2. The camera is now in Standby Mode.
HOW TO TURN OFF THE CAMERA
1. Press the “Power Button” on the remote control. (The
indicator light will turn off.)
2. The camera is now off.
HOW TO RECORD VIDEO
1. When the camera is in Standby Mode, press the “Video
Button” (see page 4). The indicator light
will flash three times.
2. Once the indicator light turns off, the camera is now recording
video.
HOW TO STOP RECORDING VIDEO
1. While the camera is recording video, press the “Video Button”
once more. (The indicator light
will turn on.)
2. The camera has now stopped recording and is now in Standby
Mode.
HOW TO TAKE PICTURES
1. When the camera is in Standby Mode, press the “Photo
Button” (see page 4). The indicator light
will flash once.
2. Once the indicator light flashes, the picture has been taken.
HOW TO RECORD MOTION DETECTION
1. When the camera is in Standby Mode, press the “Motion
Detection Button” (see page 4). The indicator light will flash
several times then turn off.
2.
Once the indicator light is done flashing, the camera is now
waiting for motion. Once detected, it will begin recording.
HOW TO STOP RECORDING MOTION DETECTION
1. While the camera is recording motion detection, press the
“Motion Detection Button” once more. (The indicator light
will
turn on.)
2. The camera has stopped recording motion detection and is
now in Standby Mode.
MICROSD CARD SLOT
To access the MicroSD Card Slot, see page 3 to locate it on your
device.
1. Gently push the MicroSD Card into the slot. The gold contacts
on the card will be inserted first, and they should face the
main circuit board. You will feel some spring resistance before
the card clicks in to place.
a. Never force the card into the Card Slot under any
circumstances. Otherwise, the unit or the MicroSD
card itself will be damaged.
2. To remove the SD card, gently push the card in so that it clicks.
The internal spring tension will eject the card.
MicroSD cards 65GB and above will require special formatting to
work.
The device will not function with these cards if they are not
properly formatted beforehand.