Version 1.1
OPERATING THE ONE-TOUCH BUTTON CAMERA
IMPORTANT NOTICE: Allow the device to charge 2 – 4 hours before
using.
HOW TO CHARGE THE BUTTON CAMERA
1.
Plug the USB cable into the port on the button camera
2.
Plug the USB cable into your PC
The device will vibrate once
The red indicator light blinks while charging
HOW TO TURN ON THE BUTTON CAMERA
1.
Push and hold the Power button for 3 seconds
The device will vibrate once
The red light will turn on
The device is now in standby mode
HOW TO TURN OFF THE BUTTON CAMERA
1.
Push and hold the Power button for 3 seconds
The device will vibrate twice
The red light will turn off
HOW TO RECORD VIDEO
1.
Put the device into standby mode
2.
Push the Record Button for 3 seconds
The device will vibrate twice
The red light will blink twice and turn off
The device is now recording video
o
Every 15 minutes, the device will save the file
and start a new file
3.
Push the Power button
The device will vibrate 3 times
The red light will turn on
The device is back in standby mode
HOW TO TAKE PHOTOGRAPHS
1.
Put the device into standby mode
2.
Push the Record Button
The red light will blink once
The device will vibrate once
HOW TO TAKE AN AUDIO RECORDING
1.
Put the device into standby mode
2.
Push the power button 1 time and the device will blink and
vibrate 6 times.
3.
Press the power button again to return to standby mode and
it will blink and vibrate 3 times.
HOW TO RESET THE TIME AND DATE STAMP (Windows Only)
1.
Visit
http://time.mgidownloads.com
2.
Choose “B3000” and your time zone in the dropdowns and click
download.
3.
Plug the device into your computer
4.
Right click and “cut” the downloaded time file
5.
Locate “Removable Disk” inside the (My) Computer folder
a.
Go to Start > Computer > Removable Disk
6.
Open the Removable Disk Drive
7.
Right click with your mouse and paste the downloaded time file.
8.
Alternatively, if you cannot get the above method to work, do the
following:
9.
Right click anywhere in the blank white space
