Figure 2.2.6: Installation complete
2.2.4
The destination directory window
will appear. At this point it’s a good idea to
take a second and confirm the full destination address for the software. In most cases, the
default will be your computer’s hard drive (C:)\Program Files (x86)\Mini-Circuits Solid State
Switch\. Or Change it then click the large button at the top to continue.
Figure 2.2.4: Destination Directory window
2.2.5
The Program Group window
will appear. This window allows you to select the
program group under which the link for the switch controller program in the Start Menu will be
created. If you change the Program Group for this software, be sure to record that information
together with your destination address. Click on “Continue” to proceed.
Figure 2.2.5: Program Group Window
2.2.6
In a second or two, your installation will be complete.
Click “OK” to
close the installer.
Page 11 of 23
AN-49-012 Rev.: (January 10, 2019) M171660 (R94356) File: AN-49-012(B).doc
This document and its contents are the property of Mini-Circuits
