Test Solutions - User Guide
Page 27
RCM Series Compact Modular Test Systems
4-Oct-17 (A3)
Send:
Clicking “Send” executes the commands listed in the “Send Commands” field. Be
sure to click the “Send” button corresponding to the connection type (USB or Ethernet)
you are using. Commands listed in the “Send Commands” field will not be implemented
until the “Send” button has been clicked.
Command Lists:
The buttons on the left of the direct mode control screen open
dropdowns that display all the SCPI commands for communicating with the RCM unit.
The commands are sorted into the following groups:
RUDAT: Contains queries that return the maximum attenuation level of a
specified attenuator, the current attenuation level of a specified attenuator, and
commands to set the attenuation level of any attenuator in the system.
General Queries: Contains a list of queries including readings of the internal
temperature sensors, and user-defined labels for each hardware window in the
system.
Switching: Contains the commands to set switch states
Switch State: Contains the queries to check switch states
Switching Counters: Contains the queries to check the switch count for any
switch port
: Clears the “Send Commands” field.
: Opens the ReadMe file for the GUI software.
