http://mini-box.com, Embedded PC Solutions
M3-ATX-HV User Guide Page 2
Power Input Connectors (right side)
Red
B (positive, un-switched battery)
Black
Battery - (negative)
White
Ignition (To start connect to B).
Do not use in the standard PSU mode (mode P0)
Power Output Connectors (left side)
Hard drive wire harness (HDD, SATA-HDD, Floppy)
ON/OFF and THUMP wire harness (connects to M3-ATX-HV pin header)
-ON/OFF wire harness (red/back) to connect to motherboard’s ON/OFF pin
headers.
-THUMP (white) to connect to amplifier remote ON/OFF connector.
Wire harness for motherboard
ON/OFF switch and Thump
control (optional)
Wire harness for serial
connection.
IMPORTANT:
Always use the “Hibernate” feature on your PC, never use “Standby”.
P0: In this mode, the M3-ATX-HV behaves like a regular ATX power supply.
Do not use Ignition switch in this mode.
P
Off-delay Hard-off
P0
Standard PSU mode
P1
5sec
1 min
P2
1 min
5 min
P3
30 min
2 hour
P4
custom
custom
