8
seconds.
8. The MICROBOX will automatically redial the last number you dialed by tapping the
PHONE button twice.
A quick press on the Phone button will end the call in progress. A short beep tone will
be heard confirming the redialing is ended.
9. If your cell phone is already paired with MICROBOX but became unlinked even
with both Bluetooth devices turned on, you need to do nothing as MICROBOX will
re-link with the cellphone automatically.
The Bluetooth button status indicator will blink two red with two short beeps if
MICROBOX and your cellphone have been re-linked successfully.
10. To unlike , press and hold the Bluetooth button and hold for about 5 seconds until a
beep sound is heard and the Bluetooth button backlight flashes one red and then all
lights go off. Alternatively pressing Power button will do as well.
NOTE :
Re-link MICROBQX by using Bluetooth operation guided in Manual of your cell
phone in case automatic re-linking failed.
PLAYING MUSIC USING THE AUXILIARY INPUT
The MICROBOX features an auxiliary audio signal input jack for connecting external
audio devices like MP3 players, CD players, iPhones or iPods (except iPod shuffle 3
rd
gen) and listen to them your through the speaker of MICROBOX.
1. Use the audio cable (included) with one 3.5 mm stereo plug on each end of the cable.
2.
Plug one end into the AUX-IN jack on the MICROBOX and the other end of the cable
into the Line-out Jack or Headphone Jack of your external audio device.
3. Tap the POWER
button to turn on the MICROBOX. The POWER button backlight
will turn green and begin flashing slowly.
4. Turn on your external audio device.
5. Press the VOLUME UP (+) / DOWN (-) button to adjust the desired volume level.
6. Operate all other functions on the auxiliary device as usual.
NOTES:
(1). If you’re connected to the Line Out Jack of your external device then you only need
to adjust the volume control on the MICROBOX. If you’re connected to the
Headphone Jack of your external device, then you may need to adjust both the
volume control of your external device and the volume control on the MICROBOX
to find the most desirable volume setting.
(2). If you use AUX IN function in Bluetooth on mode, Bluetooth audio will be temporarily
disconnected when the audio cable plugged in. Unplugging the audio cable will
