Step 7:
Inspect the assembly carefully and set your table up. (Fig. 15)
Check above instructions term by term to ensure every nut, bolt and washer on table is
installed correctly and tightens every nut and screw again.
When setting up your table,
it’s forbidden to carry the table top when turning over the
table.
Please use strength on the surrounding wooden frame or the legs when turn over the
table,
See “
Wrong method
” and “
Correct method
” (Fig.15/16)
Ensure the backrest and the leg rest are in the lowest position and locked tightly when
turning over the table.
At least two people are needed during the assembly.
Correct method
(Fig. 15)
Wrong method
(Fig. 16)
(Fig.17)
(Fig.18)
(Fig.19)
(Fig.20)
Step 8:
Fix the metal handles on the sliding door by provided part I and G. (Fig.17)
Step 9:
Install the sliding door into the inner slot on the cabinet frame and the other sliding door into
the outer slot. Then repeat the assembly on other side of the cabinet. (Fig.18/19)
Ensure the two sliding doors are set into different slots on the cabinet frame and
they can be parallel slid.
(Fig.20)
