manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Инструкция по эксплуатации инструмента, Страница: 124 / 407

Поделиться
Скачать
Minebea Sartorius Intec Maxxis 4 PR 5500 Скачать руководство пользователя страница 124

Commissioning 

PR 5500 Instrument Manual

EN-114 Sartorius

5.6  Configuring and Calibrating via a Notebook/PC

The following options are possible:

 

-

Via VNC Viewer (on the enclosed CD-ROM), see Chapter 5.6.4.

 

-

Via web browser (Microsoft Internet Explorer or Mozilla Firefox), see Chapter 5.6.5. Java (Sun) must be 
installed and activated for this option.

5.6.1  Connecting the Device to the Network and Determining the IP Address

The DHCP server is active in the network

An IP address is assigned to the device automatically.

The DHCP server is not active in the network

If the device is connected to a notebook/PC via a point-to-point connection, an IP address is assigned via the 
‘AutoIP’ function. This can take up to two minutes.

IndicatorBrowser

The IP address can be determined using ‘IndicatorBrowser’ (included on the CD-ROM) and via the ‘host name’ of 
the device (see also Chapter 5.6.3). The host name is composed of the device name and the last three bytes of 
the MAC ID. A label with the complete MAC ID is located on the outside of the device.

MAC:  00:90:6C:6B:6A:5E
IP:     ______

.

______

.

______

.

______

Default host name: PR5500-6B6A5E

UPnP view with Microsoft Windows XP

The IP address can also be determined using the ‘Microsoft Internet Explorer’ under ‘Network’ if the ‘UPnP’ view 
is turned on (default: off).
Procedure:

t

t

Click ‘Start’ -> ‘Control Panel’ -> ‘System’.

t

y

The ‘System Settings’ window opens.

Note

‘Service Pack 2’ or higher 
must be installed.

t

t

Click ‘OK’.

Содержание Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Отзывы:

Нет отзывов