Minebea Sartorius Intec Maxxis 4 PR 5500, Инструкция по эксплуатации инструмента, Страница: 128 / 407

Commissioning PR 5500 Instrument Manual
EN-118 Sartorius
5.6.3 Searching for Devices in the Network using ‘IndicatorBrowser’
The address can be determined using the ‘IndicatorBrowser’ program (on the enclosed CD-ROM).
Install and start the ‘IndicatorBrowser’.
The ‘IndicatorBrowser’ searches within the current
network ID, e.g., 169.254. and 172.24., on all available
network adaptors in the notebook/PC (several possible/
recommended, e.g., LAN global/LAN local).
Result:
List of all connected devices with status:
search??? – online - byebye – lost???
Click the button to open the default web browser, e.g.,
Microsoft Internet Explorer, directly using the marked IP
address.
Click the button to re-start the network
search.
You must wait 2–3 minutes.
Click the button to localize the associated device. Short-
term visual feedback from the device:
Display background flashes.
Acoustic signal for each device that was detected
as “online.
If the browser window remains empty after the minimum wait time, or if the expected device is not listed, the
network ID of the local notebook/PC must be checked and changed, if necessary.
Note Only certain Sartorius Intec devices are supported by the ‘IndicatorBrowser’.