— ON.STAB
automatic printing at standstill once, if weight >
1 d
— INTER
automatic printing in defined second intervals
without
standstill
— 25
Interval can be entered in seconds in the range
from 1 to 3,600
— CONT
automatic printing for each weighing cycle
without
standstill
— ACCEPT
automatic printing once
at standstill
within the
control limits
5.2.7.2
Execution mode
-
Execution mode, general (see Chapter
)
-
Execution mode: ON STABLE (see Chapter )
-
Execution mode: INTER (see Chapter
)
-
Execution mode: CONTNT (see Chapter
-
Execution mode: ACCEPT (see Chapter
5.2.7.2.1
Execution mode, general
"Automatic Printing" normally has second priority after "Automatic tare". However, if
"Automatic Totalizing" is also active then this is carried out before the printing.
Each selected element in [PRINT]- [CONTNT] is printed, apart from the total parameters if
the Totalizing application is not activated in the menu.
5.2.7.2.2
Execution mode: INTER
An interval is selected in the menu. The divisions can be selected in seconds from 1 to
3,600 seconds.
Example: If 5 seconds is selected, then a printout is created automatically every 5
seconds. The printout is carried out irrespective of whether or not the weight value is
stable.
Weight
Piece Weight
In this status, the number of seconds that can be entered via the keypad or using a
scanner is displayed in the "Weight" [A.PRINT] display, in the "PW" [INTER] display, and in
the "Count" display.
5.2.7.2.3
Execution mode: CONTNT
The elements are printed as quickly as possible with and without standstill.
5.2.7.2.4
Execution mode: ACCEPT
Automatic Printing is only carried out when the "Checking" application is activated AND
the weight applied or the weight removed is within the control limits.
This automatic printing is generated
after the
totalizing (automatic mode), if "Totalizing"
is activated.
5.2.8
Product memory
The device has a product memory for a maximum of 30 products.
5 Operating
Compact scale Puro® LargeCount
Minebea Intec
EN-33
