3.4
Additional lift-off protection
To increase the permissible lifting force for the mounting kits with constrainer, an
additional lift-off protection can be installed.
PR 6012/53S (M12) is provided for use in PR 6012/02 and PR 6012/32.
PR 6012/54S (M16) is provided for use in PR 6012/42.
For ordering information, see Chapter
.
Assembly:
-
Mount the threaded bar (1) so that it has sufficient free moving space in the drill hole.
-
Lock the nuts (2) so that there is a remaining distance A* from the washer (3).
* A = 2 mm
This distance is essential to avoid force shunts.
The required tightening torques are given in the following table.
Mounting kit
Threaded bar/
nuts
Property class
Tightening tor-
que
Perm. overall
lift-off force
PR 6012/02 and
PR 6012/32 with
PR 6012/53S
M12
A2-70
56 Nm
20 kN
PR 6012/42 with
PR 6012/54S
M16
A2-70
135 Nm
45 kN
3 Recommendations for installation
Maxi FLEX and Maxi FLEXLOCK mounting kits PR 6012/02, ../32, ../42
Minebea Intec
EN-11