Minebea Intec MP 90/04, Руководство по установке

Страница: 15 / 24

4.5 Fitting the reduction sealing ring/4-seal insert
Note:
It is essential to irst insert the side with the sealing lip in the metal sleeve!
1. Unscrew the cap nuts (2).
2. Remove the existing sealing ring from the metal sleeve (3).
3. Insert the reduction sealing ring (1) in the M20 cable gland (for cables ≤8 mm).
4. Insert the 4-seal insert (4) in the M25 cable gland.
5. Tighten the cap nuts (2) again.
4 Installation and connection information Cable Junction Box MP 90/04
Minebea Intec EN-13