Minebea Intec Mini FLEXLOCK PR 6143/00N+S, Перевод оригинального руководства по установке

Страница: 10 / 36

The required tightening torques are given in the following table.
MiniFLEXLOCK Threaded
bar/nuts
Was-
her
Tightening
torque
Perm. overall
lift-of force
Lifting destruc-
tive force
PR 6143/00N M16-8.8 * 100 Nm 60 kN >75 kN
PR 6143/00S M16-A2-70 * 100 Nm 50 kN >75 kN
PR 6143/10N M20-8.8 ** 190 Nm 70 kN >100 kN
PR 6143/10S M20-A2-70 ** 190 Nm 60 kN >100 kN
PR 6143/15 M30-8.8 *** 1400 Nm 210 kN >280 kN
PR 6143/25 M30-8.8 *** 1400 Nm 290 kN >330 kN
*
Recommendation for the
washers of M16 threaded bar:
DIN 7349 (d = 40, h = 6) or
ISO 7093 (d = 50, h = 3)
**
Recommendation for the
washers of M20 threaded bar:
DIN 7349 (d = 44, h = 8) or
ISO 7093 (d = 60, h = 4)
***
Recommendation for the
washers of M30 threaded bar:
DIN 7349 (d = 69, h = 10) or
ISO 7093 (d = 92, h = 6)
Mini FLEXLOCK PR 6143/00N+S, ../10N+S, ../15N, ../25N 3 Recommendations for installation
EN-8 Minebea Intec