Minebea Intec Maxxis 5 Phase PR 5900/81, Руководство по эксплуатации

Страница: 93 / 94

9 Printouts
9.1 General notes
The following printouts are available in PR 5900 using the Phase application:
- Device coniguration data, see PR 5900 operating instructions
- Phase coniguration data, see Chapter 9.2
9.2 Phase-Coniguration data
The option is available to print out the Phaseconiguration data. The coniguration data is
output to the printer conigured in the [System setup] - [Connected devices] system
menu under "General Devices" (see PR 5900 operating instructions).
The print width is limited to 39 characters per line. This means a ticket printer can also be
used. When printing the irst line, the program checks whether printing is possible. In the
event of a printer failure during printing, a time-out of approximately 3 s is active for each
print line.
The printout cannot be changed using "NiceLabelExpress." The printout relects the
current data status.
Configuration @admin
Inputs
Outputs
Modbus-TCP master
Limits
Parameters
Production lines
Local control
Overview weighing points
View weighing point
Simulation
Print
Press the [Print] soft key or the button to print out the coniguration.
9 Printouts Phase PR 5900/81
Minebea Intec EN-91