Minebea Intec CAW2P, Руководство по эксплуатации, Страница: 76 / 224

— COM-1 Settings for the RS-232 interface
— OFF Of
— WP-2 Weighing platform 2 (see chapter 6.3.2.1 )
— DAT.PROT Data protocols (see chapter 6.3.2.2 )*
— PRINTER Printer coniguration (see chapter 6.3.2.3 )
— COM-1 Settings for the RS-232 interface
— WP-2 Weighing platform 2
— RS-232 RS-232 interface
— SBI.STRD SBI standard
— SBI.VERF. SBI trade version (for legal metrology)
— XBPI-232 xBPI-232 protocol (RS232-Mode)*
— … … more menus [AMBIENT] 1.1 … [1.DIS.DIG] 1.8
as under WP1 (see chapter 6.3.1.1.1 )
— CAL.JUST 1.9 - Calibration, adjustment (see
chapter 6.3.1.1.1 )
— CAL.EXT. 1.9.1 - External calibration/adjustment with
default weight*
— CAL.E.USR. 1.9.3 - External calibr./adjustment with user-
deined weight
— CAL.INT. 1.9.4 - Internal calibr./adjustment (for IS scales
only)
— GESPRT.
1.9.10 - Key locked
— HND.EXT.G 1.18 - Manual entry of external weights (see
chapter 6.3.1.1.1 )
— CAL.JUST. 1.18.1 - Cal/Adj. weight
— … … more menus [CAL.SEQ.] 1.10 … [RESET] 9.1 as
under WP1 (see chapter 6.3.1 )
— ADC-232 ADC-232 protocol (RS232-Mode)
— … … more menus [AMBIENT] 1.1 … [RESET] 9.1 as
under WP1 (see chapter 6.3.1 )
— COM-1 Settings for the RS-232 interface
— DAT.PROT Data protocols
— SBI SBI protocol (see chapter 6.3.2.2.1 )*
— XBPI.232 xBPI.232 protocol (RS232-Mode)
6.3.2 COM-1
SETUP
COM-1
6.3.2.1 WP-2
SETUP
WP-2
* Factory setting
6.3.2.2 DAT.PROT
SETUP
DAT.PROT
Combics 2 Series Complete Scales Models CAW2P, CAW2S 6 Menu structure
EN-74 Minebea Intec