Minebea Intec CAW2P, Руководство по эксплуатации

Страница: 65 / 224

— OFF 4.6.1 - Of*
— ON 4.6.2 - On
— OK 4.6.3 - Only values within tolerance
— NOT OK 4.6.4 - Only values outside tolerance
— APP.ZERO 4.7 - Checkweighing toward zero
— OFF 4.7.1 - Of*
— ON
4.7.2 - On (symbol is displayed)
— APPLIC.2 Checkweighing , Classiication
applications
— CLASS. Classiication application
— PARAM.1 Parameter 1 (see chapter 6.1.2.2.1 )
— PARAM.2 Parameter 2 (see chapter 6.1.2.2.2 )
— APPLIC.2 Checkweighing , Classiication
applications
— CLASS. Classiication application
— PARAM.1 Parameter 1
— MIN.INIT 3.6 - Minimum load for application
— 1 DIGIT 3.6.1 - 1 digit*
— 2 DIGIT 3.6.2 - 2 digits
— 5 DIGIT 3.6.3 - 5 digits
— 10 DIGT 3.6.4 - 10 digits
— 20 DIGT 3.6.5 - 20 digits
— 50 DIGT 3.6.6 - 50 digits
— 100 DIG 3.6.7 - 100 digits
— 200 DIG 3.6.8 - 200 digits
— 500 DIG 3.6.9 - 500 digits
— 1000 DI 3.6.10 - 1000 digits
— APPLIC.2
Checkweighing , Classiication
applications
— CLASS.
Classiication application
— PARAM.2 Parameter 2
— CTRL.SET 4.3 - Activate SET control output
— OUTPUT 4.3.1 - SET output*
* Factory setting
6.1.2.2 CLASS.
APPLIC.
CLASS.
6.1.2.2.1 PARAM.1
APPLIC.
PARAM.1
* Factory setting
6.1.2.2.2 PARAM.2
APPLIC.
PARAM.2
6 Menu structure Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec EN-63